Ezra Freecoaster Hub
The Ezra Freecoaster hub's simplistic design make it one of the most advanced and most durable freecoaster hubs of all time. 3 different slack options are available and can be changed easily.
NON DRIVE SIDE CONE NUT CNCed 7075-T6 Alloy M14x1.0 thread
AXLE 4130 Heat Treated Hollow Chromoly Precision CNCed axle. The axle is broached at each end to accept an 8mm hex key/allen wench to make disassembly easier. M14x1.0 threads
HUB BEARINGS Precision sealed 6902RS2 sealed bearings. Some hubs use a smaller bearings but these prove to be one of the best lasting bearings
HUB SHELL Forged then CNCed from 6061-T6 alloy. 36H. Features a groove to accommodate the EASTERN POP-N-LOCK HUBGUARD.
RATCHET RING Heat-Treated Chromoly. Just the right hardness to never wear out
CLUTCH SPRING Custom Precision Made spring to allow just enough tension to get the pawls moving
CLUTCH DISC Delrin Precision CNC clutch disc (high slack option included). Min & Med Slack Discs Available Here
CLUTCH DISC PILOT SPACER CNCed 6061 Alloy
BACKSIDE DRIVER BEARING Precision sealed 6802RS bearing. Deep grooved to provide plenty of lateral strength.
PAWLS Precision CNCed Pawls. 3 per hub. These are used in the cassette & the freecoaster mode
RETENTION SPRINGS: Precision Custom Made retention springs provide just enough down force to keep the pawls out of the way.
DRIVER 9 Tooth 4130 Heat Treated Chromoly Driver Precision CNCed
DRIVER BEARING SPACER CNCed Bearing spacer
FRONTSIDE DRIVER BEARINGS Precision sealed 6802RS2 bearings. Deep grooved to provide plenty of lateral strength. 2 are used under the chain to add strength.
DRIVE SIDE CONE NUT CNCed 7075-T6 Alloy
EXPANSION SPRINGSNot Included Expansion Springs are also custom made to push the pawls up with you use the hub as a cassette